Hallo,
ein Extra Tread für einen 3Drucker, den mein Bruder leider verkaufen möchte (und ich habe das Geld dafür nicht über :crying_1_2: ):
Vielleicht ist das ja was für jemanden für Euch...
Nachfolgend die Daten des Druckers -
Neu und unbenutzt mit Rechnung aus Februar!
Preis VB 900,-
Fragen würde ich an ihn weiterleiten.
BeeTheFirst von BeeVeryCreative (es ist nicht die Plus-Version)
https://beeverycreative.com/beethefirst-plus/LAYER RESOLUTION
50 | 100 | 200 | 300 microns
________________________________________
PRINTING TECHNOLOGY
FFF
________________________________________
PRINTING MATERIAL
PLA (ø1.75mm)
________________________________________
PRINTING VOLUME
190 x 135 x 125mm (7.48 x 5.31 x 4.92 in)
________________________________________
HEATED BUILD PLATE
Not necessary for PLA filament
________________________________________
STRUCTURE MATERIALS
High-quality powder-coated steel frame | White acrylic casing with glossy finish | High-grade steel linear guides | Removable polycarbonate build plate
________________________________________
PRINTER SIZE (with/without spool)
400 x 140 x 400mm (15.75 x 5.51 x 15.75 in)
________________________________________
WEIGHT
10.5 Kg (23 lb)
________________________________________
AMBIENT OPERATING TEMPERATURE
15-30ºC (59-86ºF)
________________________________________
STORAGE TEMPERATURE
0-30ºC (32-86ºF)
________________________________________
AC INPUT
100-120VAC | 3.0A | 50-60Hz
200-240VAC | 2.0A | 50-60Hz
________________________________________
POWER CONSUMPTION
up to 90W
up to 30W on Power Saving Mode
________________________________________
CONNECTIVITY
USB cable
________________________________________
INCLUDED ACESSORIES
BEEPACK | Spatula | Blue tape | Allen key | One spool of filament | Tweezers | Region-specific power cable |USB cable
________________________________________
SUPPORTED OS
Windows (7+) | Linux (12.04+) | Mac OSX (10.8|10.9+)
________________________________________
SUPPORTED FILE TYPES
.stl
________________________________________
RECOMMENDED 3D PRINTING/ SLICING SOFTWARE
BEESOFT | Simplify 3D
________________________________________
CALIBRATION
Highly stable 3 point semi-automatic w/ Software support
________________________________________
MINIMUM HARDWARE REQUIREMENTS (PC)
Core i3 | AMD Phenom 2 |AMD Athlon X2 | 2GB RAM | 500 MB free disk space | 512 MB dedicated graphics card (GPU)
________________________________________
MINIMUM HARDWARE REQUIREMENTS (MAC)
late 2008+
